Sales

1-800-265-1098

email    sales@lmi.ca


Parts & Service

519-963-2505

email    parts@lmi.ca

Stationery Mixer

THE RIGHT CHOICE FOR DIFFICULT JOBS.

The London® Stationary Mixer (8.5 cubic yard capacity) is the ideal choice for large, difficult on-site construction jobs such as tunnels, bridges, piers, mining and other super-duty applications.

Engineered for maximum productivity, the Stationary Mixer is unsurpassed for quality, performance and reliability.

Just like our truck-mounted mixers, the Stationary Mixer is manufactured for severe duty conditions, and features high manganese, low carbon steel drum shell that’s 100% welded inside and out, with 14” LONDOX 220 blades, solid wire welded seams and a solid steel drum track. And the electro-hydraulic mix and discharge controls are easy to operate.

  • Specifications:

     

    MIXER

    8.5 Cubic Yard Mixing Capacity

    DRUM

    1/4" spun drumhead with 48" inside reinforcing plate
    1/4" LONDOX 220 wear-resistant (high manganese, low carbon) steel drum shell welded 100% inside and out

    1/4" LONDOX 220 blades with hard surfaced lips and solid wire welded seams

    Solid steel drum track machined inside taper and out square 43" discharge opening

    Auxiliary surge fins

    16" X 22.5" bolt on oval inspection hatch.

    FRONT PEDESTAL

    Fully enclosed Cor Ten "A" front pedestal incorporating a 15-gallon easy clean hydraulic oil reservoir

    Flared lower front and rear flanges to distribute load

    REAR PEDESTAL

    Easy-to-clean enclosed rear pedestal with service access to the drum rolls and standard "Knee brace"

    Pedestals constructed of CorTen"A" corrosion resistant steel

    Fully welded swivel support integrated through pedestal frame

    BASE FRAME

    8” X 3” X 1/4” HSS main rails and crossmembers, full length of assembly and 34” wide

    TRANSMISSION

    Model ZF P7300 planetary direct drive
    144.3:1 reduction
    53,000 ft.lb. output torque capacity
    Mounted to machined drum flange by 24 grade 8 bolts and to machined pedestal deck pads by 6 grade 8 bolts

    HYDROSTATIC

    Eaton heavy-duty 4.6 cubic inch variable displacement piston pump with built-in 5500 psi relief valve

    Eaton heavy-duty 4.6 cubic inch displacement motor

    Speed and direction of the drum rotation controlled from the cab and on the rear pendant

    10 micron suction filter

    Heavy-duty front-mounted oil cooler with guard

    ELECTRIC MOTOR

    60 H.P. 480v 3 phase motor (magnetic switch and Starter not included)

    DRUM ROLLERS

    CM1035 alloy steel drum roller with tapered roller bearings

    Double-sealed and centre shaft lubrication

    Roller-surfaced hardened to Rockwell C46

    Full width rear drum roll guard

    CHARGE HOPPER

    38" X 30" top opening
    19" minimum throat dimension

    CONTROLS

    Electro-hydraulic mix-discharge control with 20' quick disconnect cable

    Drum speed and direction controlled from 0 -12 RPM

    PAINTING

    Mixer and components shot blasted prior to prime painting
    All components painted prior to assembly
    Top coat one color Sherwin-Williams 2-part polyurethane