M2 Rear Loader
For international markets, the McNeilus M2 rear loader, with its improved design, is perfect for haulers looking for a lightweight, reliable, and easy to maintain body that can be mounted on a single-axle chassis.
Available in 17, 20, and 25 cubic yard body configurations, the M2’s rugged design and low cost of maintenance make it the ideal refuse body for your fleet.
Specifications:
BODY
| Floor | 3/16″ AR200 |
| Roof | 10 GA AR200 STEEL |
| Side Walls (front) | 10 GA AR200 STEEL |
| Side Walls (back) | 10 GA AR200 STEEL |
TAILGATE AND HOPPER
| Floor (hopper thickness) | 1/4″ AR200 STEEL |
| Quick-change UHMW polyethylene slide shoes |
PACKER
| Slide Face Plate | 3/16″ ASTM A572 GR 50 STEEL |
| Sweep Face Plate | 1/4″ AR200 STEEL |
| Packer Edge Strip | 3/4″ ASTM A36 |
HYDRAULICS
| Pump Make/Model | Parker Model P350 |
| Pump Size | 1.5′ |
| Pump Flow | 24 gpm @ 1300rpm |
| Control Valves | VA 20 for ejector and TG lift and VA 35 for slide and sweep |
| Oil Reservoir | 40 Gallons |
| Filter | Return filter 10 micro |
| Suction Strainer | 141 mesh stainless steel with magnets |
CYLINDERS
| Ejector | 6.25″ x 4.50″ x 3.56″ (17yd, 2 stages 71.50″ in length) 6.50″ x 5.50″ x 4.50″ x 3.56″ (20yd, 3 stages 88.75″ in length) 6.50″ x 5.50″ x 4.50″ x 3.50″ x 3.68″ (25yd, 4 stages 123.31″ in length) |
| Sweep Cylinder | 4″ x 2-1/2″ x 23″ |
| Slide Cylinder | 4″ x 3″ x 32-1/2″ |
| Tailgate Cylinder | 3.00″ x 2-3/8″ x 38″ |
HARDWARE
| Weather Pak Connector—Deutsch Connectors |
| Aeroquip Hoses and Fittings |
| Hydra-Zorb and Stauff Clamps |
PAINTING
| Packer and components steel shot blasted prior to priming with high solids epoxy primer |
| Finish Coat Akzo Coating’s Sikkens high solids acrylic urethane |
| Solid white standard |
OTHER OPTIONS AVAILABLE
| Hopper work lights | |
| Strobe light | |
| Paint colors | |
| Reeving cylinder | |
| Cart tipper | |
| Leachate tank | |
| Container tipper (kick bar) | |
| Winch |