Stationery Mixer
https://lmi.ca/index.php?option=com_k2&view=item&id=89:stationery-mixer&Itemid=167#sigProGalleria0842b53a69
THE RIGHT CHOICE FOR DIFFICULT JOBS.
The London® Stationary Mixer (8.5 cubic yard capacity) is the ideal choice for large, difficult on-site construction jobs such as tunnels, bridges, piers, mining and other super-duty applications.
Engineered for maximum productivity, the Stationary Mixer is unsurpassed for quality, performance and reliability.
Just like our truck-mounted mixers, the Stationary Mixer is manufactured for severe duty conditions, and features high manganese, low carbon steel drum shell that’s 100% welded inside and out, with 14” LONDOX 220 blades, solid wire welded seams and a solid steel drum track. And the electro-hydraulic mix and discharge controls are easy to operate.
-
Specifications:
MIXER
8.5 Cubic Yard Mixing Capacity DRUM
1/4" spun drumhead with 48" inside reinforcing plate 1/4" LONDOX 220 wear-resistant (high manganese, low carbon) steel drum shell welded 100% inside and out 1/4" LONDOX 220 blades with hard surfaced lips and solid wire welded seams
Solid steel drum track machined inside taper and out square 43" discharge opening
Auxiliary surge fins 16" X 22.5" bolt on oval inspection hatch.
FRONT PEDESTAL
Fully enclosed Cor Ten "A" front pedestal incorporating a 15-gallon easy clean hydraulic oil reservoir Flared lower front and rear flanges to distribute load
REAR PEDESTAL
Easy-to-clean enclosed rear pedestal with service access to the drum rolls and standard "Knee brace" Pedestals constructed of CorTen"A" corrosion resistant steel
Fully welded swivel support integrated through pedestal frame
BASE FRAME
8” X 3” X 1/4” HSS main rails and crossmembers, full length of assembly and 34” wide
TRANSMISSION
Model ZF P7300 planetary direct drive 144.3:1 reduction 53,000 ft.lb. output torque capacity Mounted to machined drum flange by 24 grade 8 bolts and to machined pedestal deck pads by 6 grade 8 bolts HYDROSTATIC
Eaton heavy-duty 4.6 cubic inch variable displacement piston pump with built-in 5500 psi relief valve Eaton heavy-duty 4.6 cubic inch displacement motor
Speed and direction of the drum rotation controlled from the cab and on the rear pendant 10 micron suction filter
Heavy-duty front-mounted oil cooler with guard
ELECTRIC MOTOR
60 H.P. 480v 3 phase motor (magnetic switch and Starter not included)
DRUM ROLLERS
CM1035 alloy steel drum roller with tapered roller bearings
Double-sealed and centre shaft lubrication
Roller-surfaced hardened to Rockwell C46
Full width rear drum roll guard
CHARGE HOPPER
38" X 30" top opening 19" minimum throat dimension CONTROLS
Electro-hydraulic mix-discharge control with 20' quick disconnect cable
Drum speed and direction controlled from 0 -12 RPM PAINTING
Mixer and components shot blasted prior to prime painting All components painted prior to assembly Top coat one color Sherwin-Williams 2-part polyurethane